Chilibottle dual
Copyright Claim
Chilibottle dual
Boost
4
10
4
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
Boost
4
10
4
0
23
5
Released
Description
Spice bottle with openings on both ends.
Comment & Rating (4)
All
Print Profile
0.08mm layer, 2 walls, 15% infill
(Edited)
Other Issues:kept having spaghetti failures on the main bottle. not sure why. tried multiple filaments. Same filament was able to print other larger more complicated prints after.
The designer has replied
0
Reply
Looks like bad bed adhesion. Especially with small contactsurfaces like on this print adhesion matters a lot. What often can help if you print the first layer hotter by ~10°C
0
Reply
I thought the same, tried to up the temp cleaned the plate etc. nothing would make it work. I traded in my A1 for a P1. I’ll likely try again maybe adding some brims.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
printed alright except the lid does not go on very eass
0
Reply
No more
© 2024 MakerWorld