Table Number Signs for Events or Weddings.

NO AMS REQUIRED - Made up of 4 Pieces: main body, stand, rim, and number inserts.

!!The number(s) and rim only have a 0.1mm tolerance, this results in a tight press fit. I recommended printing the first test-print plate to ensure that these tolerances will work for you. If you're having issues pressing the numbers in just get it fairly straight and flip it over to use the table. #6 & #9 look very similar but are slightly different, #9 should be slightly longer - you'll notice as they're built. I used a small amount of superglue to ensure it held in place but not fully necessary.

All the prints are facing into the bed so that the end-user is seeing the beautiful first layer. On the topic of first layer, the ‘Elephant foot compensation’ in the print profile is reduced to 0.1mm. This helped reduce any gapping found when printing smaller text details on the plate. You can easily consolidate the plates and print the numbers with the rims - the current print profile isn't done this way as you may be printing numbers anywhere between 1-20. If printing individual pieces, such as the main body or stand, you need to ensure that the overhangs have a proper amount of time to cool between layers.

I used two colors across all the parts but you can definitely get wild and go with 4 different colors.