Stormtroopers as photographed at Galaxy's Edge, Disneyland CA.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA Overture Light Grey Transmission Distance: 1.6
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #12 (0.6mm) swap to Dark Blue
- At layer #15 (0.72mm) swap to Light Grey
- At layer #19 (0.88mm) swap to White for the rest.