Here is a modular hair claw clip with 3 different claw. The system is very simply.

• You don't need support on the clamp, and you still need it on the clip.( you should set the overhang threshold to 35 degrees to use less material)
• The opening problem is solved thanks to the comment. Now the clip claws are smaller and the pliers open wider
• There are two forms of clamp and clip, a straight one (V3) and a slanted one (V3 slanted).

Print detail :

• Material : PLA
• Print layer : 0.16mm
• Support : Everywhere
• Infil : 15%

Dimension:

• Clamp V3 : 40mm/35mm/20mm
• Clamp V3 droit : 40mm/35mm/27mm
• Clip 1 : 70mm/40mm/22mm
• Clip 2 : 60mm/33m/22mm
• Clip 3 : 60mm/25mm/22mm

Please give me return to improve it and ad new claw. Thank you.