Case plus for DJI neo 2

Is it an exaggeration to say that this is the best case for the DJI neo 2?

I looked at several available cases. But they were either bulky, ugly, or unwieldy. And I couldn't find one that fit snugly without wobbling and properly protected the transmitter's antennas.

So I sat down and, based on my cases for DJI neo (Case for DJI neo, Case Plus for DJI neo, and Case Protection Plus for DJI neo) with over 4,400 downloads and over 2,600 direct prints – as of January 21, 2026), redesigned it for the DJI neo 2.

Major update!

• Two new cases with integrated battery holders have been added!
• The lid fixing mechanism has been optimized so that the lid can still be opened easily, but does not come loose on its own.
• The TPU cover was optimized in terms of dimensions and printing settings.

All previously printed parts can be mixed with the revised ones!

It's the most precisely fitting, compact, and visually appealing case you can find.

I have created the case for both versions of the Neo 2 (with and without digital transceiver) and according to your preferences (whether you want to be able to access the switch when the Neo 2 is packed, e.g., for transferring photos and videos or if you want to attach the spare batteries on the case).

• for switch access and battery holder print the plate 1 “Case Plus with battery holder - PLA" and plate 3 “Case Plus switch cover - TPU” (in TPU!)
• for switch access without battery holder print the plate 2 “Case Plus without battery holder - PLA" and plate 3 “Case Plus switch cover - TPU” (in TPU!)
• without switch access but with battery holder print the plate 4 “Case with battery holder - PLA"
• without switch access and without battery holder print the plate 5 “Case without battery holder - PLA"
• for the neo 2 with assembled digital transceiver print the plate 6 “Lid for attached Transceiver - PLA”
• for the neo 2 without digital transceiver print the plate 7 “Lid without Transceiver - PLA”
• if you want the carabiner for fixing e.g. on a backpack print the plate 8 “Carabiner - PLA, ABS, ASA”

The case has:

• included eyelets for a strap that fit discreetly and do not require any additional space
• if you want: an included durable screw carabiner
• if you want: a TPU flap to access the power button while the box is closed
• if you want: a holder for your two spare batteries

For mounting the flap place it 90° of the final position in the fixing hole, push them in and rotate them up. So it hold well on the case also when it's opened.

I frequently receive inquiries about printing problems with various print profiles created by other Makerworld users.

Unfortunately, I have no control over the profiles that other Makerworld users upload to my models (Neither the geometry nor the print settings). 

While these are often well-intentioned, they are not maintained, and the results are sometimes unsatisfactory.

Therefore, I strongly recommend using only the print profiles marked "Designer". I can only provide support for these!