BICYCLE FRONT REFLECTOR HANDLEBRA MOUNT
This is a complete REMAKE I did in Inventor (the original Inventor file is available)
It has 2 (or rather 4) holes that are threaded for ISO threads 3,5, but it surely fits others like 3 or 4.
This also is a SNAPFIT, meaning you dont need to screw it into place as long as part of the Handlebar you snap it on is about 30mm in diameter or bigger, it is flexible enough to stretch without breaking for bigger bars.
SUPPORT RECOMMENDED, on the part that snaps onto the reflector as it overhangs a little bit. So if you print fails, there is "Reflector_thread_3,5_1.stl" which is only this part of the print.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16 and 0.24
Infill:
20
black
Notes:
Resolution shouldnt really be more than 0.25 as the thrreads are printed along the wront axis (wrong as in you shouldnt to this for strength reasons). Hole size is max = 3,5mm and min = 3mm, meaning 0.25mm for top and lower thread would make the hole smaller and therefore make the screw not fit.
Autodesk Inventor
File is available for download