Astronaut in space with a balloon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm wall loops 2
Top shell layers 4
Bottom shell layers 3
Swap Instructions: 4 colors
Black until layer #5 at 0.48mms
Gray until layer #10 at 0.88mms
Wood/Light brown until layer #19 at 1.6mms
White until layer #39 at 3.2mms
Swap Instructions: 7 colors
Black until layer #4 at 0.4mms
Blue until layer #7 at 0.64mms
Red until layer #11 at 0.96mms
Yellow until layer #15 at 1.28mms
Jungle Green until layer #19 at 1.6mms
Orange until layer #23 at 1.92mms
White until layer #54 at 4.4mms