Wolverines Hueforge

Project: Michigan wolverines.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #062b4d PLA PolyTerra Army Blue  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #f78e0e PLA PolyTerra Sunrise Orange  Transmission Distance: 2
    #f0be02 PLA PolyTerra Savannah Yellow  Transmission Distance: 3.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Army Blue
    At layer #12 (1.04mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Sunrise Orange
    At layer #15 (1.28mm) swap to Savannah Yellow
    At layer #19 (1.6mm) swap to Ivory White for the rest.