Print Profile(1)
Description
Boost Me (for free)
This model is a DIY clock.
The clock measures 128mm in length and width, with an installation thickness of 1.6mm and an 8mm central hole. The clock hands selected for the model should be short (within 60mm), or you can trim standard ones yourself as desired.
For the clock movement, I bought the Baabek 1044 movement from Taobao, which is quite cheap; I bought four for 10 yuan.
Because I ran out of super glue, when designing this model stand, I considered dovetail positioning with a slight interference fit, making the installation a bit tight. However, it's not that exaggerated; just gently tap it with a small wooden mallet.
Those with weaker manual skills should print with caution, to avoid giving me a low rating (dog head).
*Due to the large model area, the build plate must be thoroughly cleaned or glued to prevent warping and spaghetti.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)