AMS Drypods 675 GRAMS SILICA !! ULTIMATE SETUP !!!

Remixed by

AMS Drypods 675 GRAMS SILICA !! ULTIMATE SETUP !!!

Remixed by
Boost
25
39
26

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
20.3 h
7 plates
4.9(10)

Boost
25
39
26
5
100
98
Released

Description

I made this ultimate collection of mods and accessories and combined it in a complete project with several different boxes and items to make it in your own personal choice of colour. Including a MULTI-SLOTTED hygrobox so that your meter will be straight.

 

The boxes all together hold about 675 grams of silica to keep your filament as dry as possible.

 

All items work for my AMS but as i know for example there are different versions for the buttons please try printing one before you print them all.

 

Since some people reported issues of bed adhesion i added a brim of 10mm to the first plate with the boxes…

 

I made different components with logo and without as you can see above the buildplate.

 

To make the magnetic boxes do not place them on another plate because the settings are made for that specific plate !!!!!

 

I used magnets from amazon : Magnetpro 40 stuks schijfmagneten, 10 x 3 mm, 2,3 kg kracht, magneten voor magneetbord, whiteboard, prikbord, koelkast : Amazon.nl: Kantoorproducten

 

hygrometer : Thlevel Digitale minithermometer en hygrometer met lcd-scherm, 3 stuks, meet temperatuur en luchtvochtigheid, voor koelkast, aquarium, -50°C~+70°C (3 stuks B) : Amazon.nl: Huisdierbenodigdheden

 

 

Comment & Rating (26)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 2 walls, 15% infill
I live this model! I found it by chance on here as I was looking for silica holders for my AMS unit. They fit perfectly in place and the small side holders are amazing!!! I highly recommend this model to anyone that has an AMS as the only draw back is the time it takes to print it due to the angle of the holes, but other than that it’s awesome.
The designer has replied
1
Reply
thanks for the feedback , I also love them together they keep my ams very dry.
0
Reply
Replying to @mkersjes :
You’re very welcome! I apperciate the effort you put in to make these cuz they are really helpful 🙏
0
Reply
Ich habe es mit farblose PETG gedruckt, um den Farbumwechsel der Silica-Kugeln besser zu sehen. Es passt hervorragend! Danke.
The designer has replied
1
Reply
thanks, I hope you enjoy the model please take a look at my other models
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
many thanks I hope you enjoy the model
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Very nice collection of boxes. However, one of the taller boxes (I think it was the one in the right back region of the first printing plate) loses bed adhesion after round about 75% print time. Happened two times. But I simply replaced it with a second print of the other identical box.
The designer has replied
1
Reply
I have added a brim to the first plate of the model with the boxes , If you have trouble with bed adhesion try cleaning your plate with soap.
0
Reply
Replying to @mkersjes :
Yeah, the plate was cleaned etc. As mentioned: it only happened to one box of the whole plate. Anyways, they were printed without brim if I remember correctly. Anyways, great design and work pretty well.
(Edited)
1
Reply
Replying to @user_211525597 :
ok thanks , I have now added a brim to be sure , but will mention it in the text. thanks and I hope you enjoy the model
0
Reply
Good, but i still dont know what the side panels are for...
The designer has replied
1
Reply
there are 5 boxes for between the feeders in the front of your ams , 2 boxes for under the rolls of filament in your ams , and lastly 2 large boxes for mounting in the sides of your lid of the ams
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Really good 😀
The designer has replied
1
Reply
thanks , I hope you enjoy the model please take a look at my other models
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Passt gut für das Einfüllen des Trocknungsmittels.
The designer has replied
1
Reply
thanks
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
thank you so much, it is really helpful and make AMS dry
The designer has replied
1
Reply
thanks
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
thanks, I hope you enjoy the model please take a look at my other models
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
thanks, I hope you enjoy the model please take a look at my other models
0
Reply