Case for using Klipper screen with Bigtreetech's Pi TFT70 V2.0/V2.1 screen and Raspberry Pi 4. The included standoffs should be placed on the outer corners. Requires 4 M2.5 screws to fasten the case to the standoffs.

USB cables used for power and data to the Pi should be low profile or right angle to clear the perimeter of the case. 
 

There is a cut out access to two USB ports as well as screen direction and brightness controls. 

For mounting/stand options there are 4 holes to be used with M3 threaded inserts. These holes are 25mm apart (square formation) and can be used with the stand included in the files or your own adapted mounting option.