Summary

Free my models 38c2b567544e

This magnetic apple pencil tray works seamlessly with any desk setup. It is elegantly designed so you can't see the magnets but still have enough force to hold the apple pencil.

Infill
75% for good weight and sturdiness
infill geometry triangles (I didn't try anything else)

First, remove support you will probably need tweezers. then put some white paint in each whole to help from front visibility you will need a toothpick. Now put the apple pencil on the tray flip it over and line up the magnets this is so you match up the polarities. Then flip it over so the magnets are on the bottom and push down on a hard surface and the magnet should are stuck in the holes.
you will need 2x 3mm magnets
I bought 1010 of these off amazon for 32 bucks as a fidget toy then I had this to try to hold my apple pencil.

Free my models 38c2b567544e

Print Settings

Rafts:                     

Doesn't Matter

Supports: 

Yes

Resolution:                     

.06 or .1

Infill: 

75% for a nice weight

                Filament:                                    3d creality pla PLA                                    white

Custom Section