Print-in-Place Ford Bronco 2021

Copyright Claim

Print-in-Place Ford Bronco 2021

Boost
45
59
18

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

[75% Scale]: 0.2mm layer, 2 walls, 10% infill
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
1.6 h
1 plate
4.6(15)

0.2mm layer, 2 walls, 15% Gyroid Infill
0.2mm layer, 2 walls, 15% Gyroid Infill
16.1 h
2 plates
4.0(1)

Boost
45
59
18
5
132
103
Released

Description

This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate.

 

The only thing you have to do after printing is to snip off a few tiny pillars that prevent the axle casings from fusing with the wheel axles during printing and you are ready to conquer the badlands!

 

This model is best printed at 100% scale, however, anything down to 60% scale works just fine.

 

Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges could become a problem if you decide to scale the model up, but otherwise, it's a pretty easy model to print. However, if you have issues printing any of my designs, DM me on Instagram (https://www.instagram.com/vit.budina/) and I will send you my Cura profile.

 

Enjoy! :D

 

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.

Comment & Rating (18)

Please fill in your opinion
(0/5000)

Boosted
came out so cute!
0
Reply
nice
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
👍🏻🚙
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
wheels print hinged to the axel. Need to break them off to let the tires spin.
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
Great print, no issues.
0
Reply
Boosted
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% Gyroid Infill
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
Other Issues
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
[75% Scale]: 0.2mm layer, 2 walls, 10% infill
0
Reply