Banshee_Sing
Print Profile(1)
Description
Project: Banshee_170.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.33x170mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#e2dedb PLA PolyLite White Transmission Distance: 5
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Grey
Border Only Colors from here until the end.
At layer #20 (1.68mm) swap to White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #32 (2.64mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)