I have designed 2 adapter plates for the Kobra Go to attach a drag chain (designed by aroo) to the print head and beside the extruder.

I am using 15 individual links (with a 30° angle) that I enlarged to 110% to ensure enough space for the cable.

I printed each link individually with supports. The last link attached to the print head is freely movable and does not have a 30° angle. To avoid potential friction or resistance, I lightly rounded the edges of the holes using a cutter. Inspect the connection points for any leftover support residue and remove it. Alternatively, you can avoid using supports altogether, as suggested by aroo.

In addition to the printed models, you will need 4x M3x10 socket head screws and 2x M3 nuts (for attaching to the extruder mount). You can buy them in your local Hardware Store. (I used M3x16 screws and cut them down to the right length.)

This upgrade does not limit the maximum print volume.

If you download the Cable Chain models directly from aroo, please note that you need to scale them to 110% so that they fit into the holders.

It is my first proper design, so there is still room for improvement.

This is a Prototype.
Use at your own risk.

Printed with eSun Matte PLA Deep Black