Taillight for bike designed to be clamped-mounted on seatpost (30.9 or 31.6mm diameter). Printed casing fits 4 eagle eye 22mm leds, 2 aiming straight back (red ones) and 2 above them at a slight angle intended to be used as turn signal lights. The cables for the leds are routed internaly and exit thru one hole on the bottom. You can glue the cables in or use printed cover which is press fitted into the cable exit hole.

3 versions avilabile, one without a logo and the other two with batman and bolt logo; The free space on the back surface kept bugging me to add something :D

Parts list:

• 2x 22mm eagle eye led red
• 2x 22mm eagle eye led orange
• 1x DIN 912 - M5x30 bolt
• 1x DIN 912 - M5x20 bolt
• 2x M5 hex nut