DISPLAY BOX

Display Box, 97 mm Wide

This design was created to display 3D-printed themed characters, but it can be used for any figure. The height can be varied, as the sides are designed, so the figure can be visible from any angle. For this, I used 1.5mm acrylic because it was the easiest to find in my area.

If you would like me to make a modification for a different thickness, I would be happy to do so. The current design is made for a height of 122 mm.

The dimensions of the box would be:

97.6 x 97.6 x 122 mm

And the dimensions of the necessary acrylic would be:

2 units of 100 x 137 mm (the acrylic inserts 10 mm into the base and 5 mm into the top cover)

2 units of 97 x 137 mm (the acrylic inserts 10 mm into the base and 5 mm into the top cover; this one needs to be slightly smaller to fit well)