Under-Desk Accessory drawer by impietro

impietro

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

2 plates

4.9(19)

Boost

Released

Description

I designed this drawer to keep all my accessories in order: hotends, nozzles, Allen keys, fans, cutters... The drawer is just the right size to fit the instrument box that comes with the a1 mini. As you can see from the photos it fits perfectly because I made it to measure. I studied this solution to optimize the space since I have the prints on a shelf. In the file you will find drawer and rails, printed and mounted. I used glue to attach the rails to the shelf where I mounted everything, but there are also two holes for screws, I recommend using glue or double-sided tape for greater tightness.

a1 mini a1 tool box small

Comment & Rating (23)

@jwgomes

Print Profile

0.2mm layer, 2 walls, 15% infill

just what I was looking for to add storage for my AMS stand. I did manage to shrink the width of the middle one for smaller storage use. I used the provided settings in sunlu PLA+ white and gray easily installed with super glue and zip kicker

The designer has replied

@impietro

Hi, thanks for printing and reviewing one of my models, I'm happy you liked it. I like this arrangement you used under the ams, very functional. I thank you 😃

@marinisi

Print Profile

0.2mm layer, 2 walls, 15% infill

👍👍

@FrancescoM

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect

@CondoreEdm

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@impietro

thank you 😃

@blackstarphotog

Print Profile

0.2mm layer, 2 walls, 15% infill

Although a good print, the screwholes, of the support, are only on the back, and not on the sides, making it that the drawers can fall out, once pulled out. There is also safety holding the drawer in the support holder, so if the kids pull to fast, it drops. But nothing a re-design cannot fix. I will have to drill some wholes in the support holder then

The designer has replied

@impietro

Hi, I'll immediately design a different support model, adapting it to your needs, I'll publish it to you at the weekend. 😉 if you tell me what screws you use I'll make the holes to measure

(Edited)