I made this Hueforge print using an AI generated image. It's designed to be printed on a 4 color AMS Lite. Using the uploaded 3mf file, for the final color change of yellow to white you'll need to wait for the print to pause, then unload the yellow filament and load in the white filament to the same slot on the AMS Lite.
Print Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Overture White Transmission Distance: 4.4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #10 (0.88mm) swap to Orange
At layer #14 (1.2mm) swap to Yellow
At layer #17 (1.44mm) swap to White for the rest.