Nintendo Classic Logo Lightbox by KF Designs

KF Designs

Household>Decor

Print Profile(1)

All

0.2mm layer, 2 walls, 15% infill

Designer

4.6 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

Released

Description

This is a Nintendo Classic Logo Lightbox.

!! Remove the purge line at the beginning of printing !!

The profile works OK with my settings but you must check and dial in your Printer accordingly.

there is a hole on the back side to hang the Lightbox and a hole on the side for a USB-C adaptor …
If you don't want to use the USB adaptor i have also included a small cap with a 4mm hole just to fit your cable in and another cap without a hole if you want to use a battery pack in it.

Enjoy !

USB-C Adaptor :https://s.click.aliexpress.com/e/_DBngla9
LEDs : https://s.click.aliexpress.com/e/_DnlApXf

Comment & Rating (4)

@Malork

Boosted

Printing this as we speak! one question though: "If you don't want to use the USB adaptor i have also included a small cap with a 4mm hole just to fit your cable in and another cap without a hole if you want to use a battery pack in it." I don't quite understand what you're saying here. I see that the .3mf file has only the box and back panel and both have holes. Do you mean there's also a .stl file with caps / inserts for said holes? Print is awesome btw and texture is lovely using the PEI-plate. (printed on a P1S with 0.4 nozzle, AMS and textured PEI-plate using Bambu Red and Bambu white).

(Edited)

The designer has replied

@KFDesigns

You're right ! .. Just Noticed that i have forgot to add the small caps on the design .. I have just add them, you can just download the model again and to the second plate you can see the caps ..