Hi this is christmas tree 1 2019 vase print it has a star topper and base. It's easy to print and a fun decoration for the festive season i have added lights inside my big 200% version depending on the lights you get you should be able to fit them inside and possible in to the star at the top as it is in 2 parts for easy printing. I hope you like and as always happy printing.

I have a youtube video of this tree if you would like to see just search for Brithawkes on youtube or follow link.

link https://www.youtube.com/watch?v=IQDrbi7aqJQ

(update) i have added a main body version with out a indentation in the bottom as there seems to be a issue with prusa slicer trying to print a inner was and bridge the gap in vase mode this doesn't happen in cura in vase mode so this version you can print a solid base then just cut it out so you can add lights if you wish.

Print instructions

i have printed this in many scales from 30% to 200% all have printed well in vase mode. sliced in cura please check you slicer before printing and make sure that it is not trying to print a inner wall as i have added a rebate inside to create a lip to aid addition to the bed but not a solid base so i could fit lights in. i printed with 0.4 nozzles and 1mm nozzles from 0.15 up to 0.4 layer heights and on the 0.4 nozzle i used a line with from 0.4 up to 0.8.