Wall Shelf for TP-Link Deco WiFi Router (or any other round objects)
Print Profile(1)
Description
This is a wall-mounted shelf that is designed for holding a TP-Link Deco WiFi routers. There's an opening at the back to allow the power and LAN cables to run through.
It is also suitable for any round/cylindrical objects that are at most 90-100mm in diameter.
To simplify the printing, I have split this into the base and the legs. They are meant to be super-glued together (refer to the photos on placement). Ensure that the back of the legs that are facing the wall are flush with the back of the base.
Printing recommendations for strength:
- 4 Walls
- 15% Gyroid infill
The screw holes are 5mm in diameter, with 9mm opening so you will need to use a long screwdriver to drive the screw through the holders on the top part of the legs.
(I had to take mine down and hold it with my hands to take photos as they were mounted high up my wall to maximize WiFi reach)
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
