Platform

1. Most uploaded models have no supports or optimized supports. Beginner-friendly, one-click mobile printing.
If there are supports, use model pliers to remove them piece by piece If you need to assemble, use 502 super glue.

2. The images you see are real photos uploaded after I successfully printed them myself.
For more real detailed images of the model, you can scroll down from the main image and click to enlarge for details.

3. Go to my homepage, more models are available for download.

0.4 nozzle 0.2 or 0.16 layer height is fine.
For even better results, you can use a smaller nozzle and a lower layer height.
Try not to modify the printing parameters, you can directly print with one click on your phone.

4. The most common reason for beginner printing failure is poor first layer adhesion, it is recommended to wash the build plate with dish soap before printing.


Thanks for the boost Thanks for the boost, I will try to upload more models for everyone to download.

5. You may not in any way share, sublicense, sell, rent, host, transfer, or distribute the digital or 3D printed versions of this work, or any other digital or physical format derivative works of this work (including but not limited to secondary creation of the item, and hosting on other digital platforms). Without permission, these items may not be used in any way for commercial purposes.

Platform 

1. Most uploaded models have no supports or optimized supports. Beginner-friendly, one-click mobile printing.
If there are supports, use model pliers to remove them piece by piece If you need to assemble, use 502 super glue.

2. The images you see are real photos uploaded after I successfully printed them myself.
For more real detailed images of the model, you can scroll down from the main image and click to enlarge for details.

3. Go to my homepage, more models are available for download.

0.4 nozzle 0.2 or 0.16 layer height is fine.
For even better results, you can use a smaller nozzle and a lower layer height.
Try not to modify the printing parameters, you can directly print with one click on your phone.

4. The most common reason for beginner printing failure is poor first layer adhesion, it is recommended to wash the build plate with dish soap before printing.


Thanks for the boost Thanks for the boost, I will try to upload more models for everyone to download.

5. You may not in any way share, sublicense, sell, rent, host, transfer, or distribute the digital or 3D printed versions of this work, or any other digital or physical format derivative works of this work (including but not limited to secondary creation of the item, and hosting on other digital platforms). Without permission, these items may not be used in any way for commercial purposes.