Search models, users, collections, and posts
Fruit fly trap
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 100% infill
Designer
2.1 h
3 plates
Open in Bambu Studio
Boost
33
145
6
6
102
44
Released
Description
Content has been automatically translated.
I have designed a fruit fly trap in the same style as my pots. The trap is only approximately 51mm x 51mm x 50mm in size and is hardly noticeable. I always fill it with a little vinegar and water mixture, followed by a drop of dish soap. Everything is printed without supports and with 100% infill. Ideally, the bottom part should be printed in ABS. You can, of course, also place a piece of fruit inside instead of the vinegar mixture. The flies should no longer be able to find their way out due to the funnel shape. I have revised the model again. The bottom is now thicker, the wall thickness has been increased, and the slope in the bottom has been enlarged further. I have also included a second lid with four slots on top. After several tests, all were sealed with PLA. However, it also heavily depends on the material. I tested Bambu Lab matte and Sunlu matte. For the first attempt, it's best to place a plate underneath to ensure it's sealed. Feel free to give me feedback in the comments; I can still adjust it then
Boost Me (for free)
Boost for more models:)
Boost Me (for free)
Boost for more models:)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)