Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #14 (1.2mm) swap to Red
At layer #18 (1.52mm) swap to Jade White for the rest.