Infinity Fabric

***I HIGHLY recommend using the SuperTack Cool Plate for these. I have had much success also with a well cleaned texture plate, and even a smooth plate, but those can be hit or miss. The SuperTack Cool Plate is by far the most reliable.***

-------------------------------------------------------------------

1/30/2026 UPDATE - I added a special Valentine's Day 12x12 profile as well as improved the keychain link corner design for better strength!

------------------------------------------------------------------

This is an amazing model. Super satisfying feel, noise, flex, all of it!

I designed it for symmetry of flex as well as the finished edges using the edge and corner elements. It is one of my personal favorites having printed a hand full of other designs.

I've provided full bed plate files for all the Bambu series. Most are too large to be included as print profiles but are able to be downloaded on MakerWorld.com and are not accessible through the Bambu Handy or Bambu Studio apps.

The following are only available by going to MakerWorld.com directly and selecting “Download STL/CAD Files”:

H2S: 44 x 41 elements

H2D and H2C: 42 x 41 elements

X, P, and A Series: 33 x 33 elements

Mini: 23 x 23 elements

***SPECIAL NOTE FOR THE X1 and P1 files*** 

These are utilizing the full print bed and does remove the area reserved for automatically cutting the filament (wiki link below). For this reason, you will need to print the stopper blocker and utilize your external spool position. You can use the blocker file linked to in the wiki or use mine. The one I have provided has been beefed up since the one from wiki broke on me when I used it.

Print volume limitations, and how to use the full build volume 256x256x256mm³ | Bambu Lab Wiki

***SECOND SPECIAL NOTE FOR THE X1 and P1 files***

Be ready to remove the calibration line, otherwise the full bed print will print over it!

***THIRD SPECIAL NOTE FOR THE X1 and P1 files***

There is a pause in the middle to allow you to change filament color on the two-color file since to do the full bed you will not be able to use an AMS and must use the external spool.

***SPECIAL NOTE FOR ALL***

Per usual, A FRESHLY WASHED BED PLATE IS A MUST!!! Don't start this long print without giving it a good wash first! Don't rely on IPA alone. Give it a wash with dawn dish soap and rinse it well.

NOTE: The slicer time can be a bit. An hour, two, or three. I highly recommend exporting (saving) the gcode after your slice has finished before you mistakenly lose it.

Print time is approximately 1min per element (i.e. 33 x 33 file = 1089 elements = 18.15 hours).

I like printing these in basic PLA on a smooth plate for a nice noise and feel.

Post your color combos in the comments and let me know if you like the design!