Explore various build options tailored to your preferences. The base build necessitates 14 M2 heat-set inserts and 14 M2x12mm bolts. The indents for bolt heads are 4mm in diameter; keep this in mind when selecting bolts. All builds require gasket material; I utilized foam window gaskets with pre-applied adhesive, but any 1.5-3mm soft foam will suffice. For an alternative to magnets, you can opt for gluing the parts together. The TRRS cover without a hole is designed for wireless builds.
Option 1: No Magnets
Article | QTY | Comment |
---|---|---|
Regular Bottom | 2 | Print one mirrored in the slicer |
Regular Top Right | 1 | |
Regular Top Left | 1 | |
Plate | 2 | If you want a consistent top finish, mirror one in the slicer |
M2 Heat Set Inserts | 14 | |
M2x12 Bolts | 14 |
Option 2: Some Magnets
Article | QTY | Comment |
---|---|---|
TRRS Cover Bottom | 2 | Print one mirrored in the slicer |
Regular Top Right | 1 | |
Regular Top Left | 1 | |
Plate | 2 | If you want a consistent top finish, mirror one in the slicer |
TRRS Cover (with or without hole) | 2 | Print one mirrored in the slicer |
Heat Set Inserts | 14 | |
M2x12 Bolts | 14 | |
3x3x1mm Magnets | 16 | For TRRS cover |
Option 3: All the Magnets (and Optional Tenting)
Article | QTY | Comment |
---|---|---|
TRRS Cover Bottom | 2 | Print one mirrored in the slicer. You may also use a non-cover bottom if you wish. If so, there's no need for 3x3x1mm magnets. |
Top Right w/ Feature | 1 | |
Top Left w/ Feature | 1 | |
Plate | 2 | If you want a consistent top finish, mirror one in the slicer |
TRRS Cover (with or without hole) | 2 | Print one mirrored in the slicer |
Either Feature Regular | 2 | Print one mirrored in the slicer |
or Feature Tilted | 2 | Print one mirrored in the slicer. Requires supports. Organic supports with automatic painting work great. |
Heat Set Inserts | 14 | |
M2x12 Bolts | 14 | |
3x3x1mm Magnets | 16 | For TRRS cover |
5x5x2mm Magnets | 16 | For features |