This was a request OK? OK. Please stop requesting weird stuff.
We love Saint Patrick's day, so I guess the emoji just wanted to show his appreciation for it or something.
Printing
There are hollow, solid and magnetic poops available. The non-magnetic models are large and are intended for you to scale up or down in your slicer. The exception is the magnetic version which should be printed at the supplied scale.
The poops are made to be printed directly on the print bed in their normal orientation with no supports. I used a 0.4 nozzle with a 0.2mm layer height for everything. The model will benefit a smaller layer size for detail.
Sorry there are not profiles available for the magnetic versions as I have not printed and photographed them - yours are welcome which may be made from the raw files posted here.
The plastic I have used in my print is Extrudr NX-2 white, black, brown and eSun ePLA Matte Green.
Magnets
If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion.
The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.
Versions
2024.02.24: Initial version.