After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z axis bar. I designed a guide to top mount between the two top screws using a 3mm x 10mm screw using DaVinnci2000s nut to lock into the track: https://www.thingiverse.com/thing:3050607
Printed on Anycubic Vyper
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Infill:
50%
Filament:
eSun PLA+White
Notes:
Temps:
first layer: 205C
All other: 195C
Bed: 60C
Speed 70mm on perimeter
Layer Height: 3mm
0.4mm nozzle
50% infill is probably overkill.
Print time was 46 min