My own design of this iconic shield from Legend of Zelda.

See my base stand file here:
https://www.printables.com/model/319619-hylian-shield-base
and Targ's Sword here:
https://www.thingiverse.com/thing:1411578

Print is about 13 hrs at 0.2mm setting. Standard PLA+ from eSun.
205 first layer, 195 all other
Bed:60C
3M x 12mm screws in the back for a strap. I used leather.

Post print I have fixed the STL to be flat on the back. I didnt realized until after printing that the back had a slight curve that made the back have supports which didnt buff out. Newest STL has been uploaded.

Printed on Anycubic Vyper
Hand painted post with acylic.

Print Settings

Printer:

Anycubic Vyper

Rafts:

No

Supports:

No

Infill:

20%

Filament brand:

eSun

Filament color:

Blue

Filament material:

PLA+

Notes:

Print is about 17 hrs at 0.2mm setting. Standard PLA+ from eSun.
205 first layer, 195 all other
Bed:60C