Woven Easter Basket
Print Profile(3)
Bill of Materials
Description
Woven easter basket with a moving handle. The basket is large enough to easily hold 18-24 eggs.
Additional components needed:
- 2 M3x12 bolts - button head bolts look the nicest for this model
- 2 M3 nuts - locknuts recommended
This is part of my Woven Series. You can view all of my Woven Series models in this collection.
Print Settings
A brim may be needed for the handle.
Assembly
Insert the nuts into the appropriate holes on the inside of the basket. Insert the bolts through the holes in the handle. Push them through the holes in the basket and screw into the nuts. My suggestion is to tighten the bolts just until the handle can stay upright on its own.
The filament used in the pictures above is polymaker PolyTerra Lavender Purple PLA
Membership
Are you looking for a Commercial License for all JamesThePrinter models?
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (273)