Diese Gurtwickler-Blenden sind an vielen handelsüblichen Wicklern einsetzbar.
Lochabstand 135/160/180/215 mm
Gedruckt aus PETG, PLA sollte auch problemlos funktionieren.
Materialbedarf ca. 17 -25g je nach Größe
Druckzeit ca. 1 bis 1,5h
These belt winder covers can be used on many commercially available winders.
Hole spacing 135/160/180/215 mm
Printed from PETG, PLA should work just fine too.
Material required: approx. 17 - 25g depending on size
Printing time approx. 1 to 1.5 hours