Model of a real world house named “Marta” in my town.
STL files are with real world dimensions, you need to scale them down to 20% if you print them individualy.
• For windows I would suggest 19.50% scale just to be sure they will fit properly, same applies for doors.
• Windows are printed in combination with black and transparent filament. Best way is to make only 1 bottom layer, and no infill, no top layers. That way it will be just like windows, transparent.
• For roof I suggest to print it on its side and just make it hollow, with 0% infill, no need for infill on the roof, just make 3-4 walls.
• Roof part 1 and part 2 needs to be glued together
• “Joiner” (3pcs) needs to be glued just to the hole on the walls
Hope you will have fun assembling this house :)