Another “Art Deco” Hueforge , this time it's good old Donald Duck.

This time I went for another “old timey”/Sepia infused look. I hope you like it.

The dimensions are 180x180 mm so it fits nicely in a square frame.

I also made a frame you can print to use for this and my other Hueforge models :

https://makerworld.com/en/models/194571

The colours I used Black (Elegoo)→ Red (Elegoo)→ Yellow (Elegoo)→ White (Elegoo)

For this model I changed the thickness of the base layer, now it's 1 mm, this creates a much stronger/durable end result.

I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a fast print result.

If you want to slice the file manually for use without AMS or other printer please use these settings :

Print at 100% infill with a layer height of 0.04mm with a base layer of 1mm

Swap Instructions:
Start with Black
At layer #4 (1.12mm) swap to Red
At layer #16 (1.6mm) swap to Yellow
At layer #20 (1.76mm) swap to White for the rest.

Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.

If you like my work: a Boost on Makerworld is always appreciated!

Or if you want you could give me a tip or "buy me a coffee" on :  https://ko-fi.com/3deekes

If you are interested in selling any of my current and future releases send me a message to info@3deekes.be