Tilt Rotator

Please refer to the full assembly manual here:
https://docs.google.com/document/d/1xuqdO8nby0kSA0-Rt30hsLjs6jAnjvzEOHcTG11Tj3Q/edit?usp=sharing
 

======
Tilt Rotator (TRS)

Prepare the following parts.

Insert the two TRS pins into the bracket as shown. Then insert those two brackets into the top opening. The bracket with the logo should be facing forward.

Insert the rotation pin through the middle part of the TRS body and into the bottom part.

Ensure the pin and bottom pieces are aligned correctly. 

Insert the grabber base into the openings in the base.

Then insert the upper and lower grabber blades.

Fix the grabber using two screws.

Push in the TRS pin(red), then insert the cylinder rod (silver) into the upper cylinder head (black), align the upper and bottom parts, and push the TRS pin out to lock everything in place.

Install the handle to lock the top brackets.

Using the same tool pin and idler link pin print with the standard bucket to attach the bucket to the bottom side of TRS, using the longer tool pin and idler link pin (printed with TRS) to attach TRS to the stick and idler link. As shown in the picture.

You can also attach Grapple to TRS, using the tool pin and idler link pin printed with Grapple.