Mini Dumpster

I created this mini dumpster-shaped container for the desk. I wanted a somewhat funny container to store all the accessories from the Beginner Bambu kit.

I included two plates for the lid in the profile. One with standard support and one with some filament saving.

Some stray threads will remain on the inside of the lid, but it does not affect the aesthetics in the slightest.

IMPORTANT: use a very dry filament, otherwise the lid will warp slightly. I also added a brim to keep it more secure to the plate.

For assembly, simply lightly force the lid supports and slide everything into place. Pay attention if there are any stray threads on the 4 small pins on the bin side that prevent the lid from fitting properly. If necessary, trim with the Bambu scraper, or a utility knife (be careful!!).

The wheels must be detached from the support (twisting the wheel relative to the support will remove it immediately), clean them if they have burrs on the stem and insert them all the way into the hole, finally, position the wheels as desired.

P.S. the model is already scaled from the original (drawn in 1:1 scale!), but if a different size is desired, it can be scaled while maintaining proportions, even between the two plates (if I scale the bin to 110%, the lid also to 110%).