This is made to accommodate a “press fit” for the tapered adapter that came with my VacMaster Shop Vac 2.5" hose. The stock tapered adapter's OD (outside diameter) starts at about 58.5 mm at the base of the connector and tapers to about 57 mm at the tip that gets inserted.

• This prints with no supports. 
• Print as oriented. 
• Recommend you print with an extra number of perimeter walls for strength, and it seems to print faster when it does not have to change gears to bother with infill.

In the attached photos, the bright blue part is what was printed.

This was used in conjunction with my other printed dust collection parts linked below (some links still pending):

• Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac
• Dust Collection 4-inch Port to 2.5-inch Hose Tapered Adapter Dust Collection Reducer Fitting (v1.0)
• Dust Collection Adapter for SKIL 10-inch Worm Drive Table Saw, going from 2.5" (ID 64mm) to 2.25" (ID 57mm) v1.0
• Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port

My PayPal tip jar: https://paypal.me/design8studio

Various LowRider 3 CNC remixes:

• LowRider 3 CNC Collection

View all my models and remixes:

• Design8Studio 3D models

*Amazon product links are affiliate links.