Nyan Genesis Evandesktop - DESK PEN-01 by Gatto

Gatto

Household>Office

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 6 walls, 25% infill

Designer

3 h

1 plate

5.0(2)

Boost

113

142

Released

Description

Nyan Genesis Evandesktop: The Desk Pen-01 is here to protect your pen from the Angels (and from getting lost).

3D print this bad boy and let the power of Evangelion flow through your desk!

The Desk Pen-01 is the purrrfect way to show your love for the series and keep your desk organized. It's designed to hold a variety of pens, pencils, and other writing utensils, and it's sure to turn heads wherever you put it.

Print in purple or whit silk bi-color filament for incredible reflexes!

If you like my work please FOLLOW MEOW! More to come! :3

Check out my profile for other models and follow MEOW!

Comment & Rating (8)

@Invader_Akira

I had to go and alter the initial file since I kept having issues with the overhangs or one of the chest corners being higher than the other one. I changed it to .20 Standard and change the tree supports to organic, I believe. Prints worked a bit better after that, but still had some minor issues and had to use a deburring tool. I did silk twice (kept having the layers coming apart on one of them, but that was my doing) and regular PLA. Once I'm able to rate it, I'll do so. Still was a decent print.

(Edited)

The designer has replied

@Gatto

Hi there, I'm sorry to hear you had some trouble with the print. That's never fun! Here are a couple of tips that might help: - Use brim. The "chin" has a small contact area and the connection point to the rest of the head is a bit high. A brim will help to prevent the print from warping. - Use tree supports. Tree supports are great for overhangs. They provide more support than regular supports and they're easier to remove. I've attached two photos of my print for reference. I hope this helps! Thanks for the feedback! And if you want to stay up-to-date on my new designs, please follow me. Thanks :)

(Edited)

@Invader_Akira

I did use the brim and the tree supports. I had issues with some of the overhangs, but I worked it out as best as I could 😁

@user_3548248864

Boosted

Thank you so much

The designer has replied

@Gatto

❤️

@user_206579130

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

The designer has replied

@Gatto

❤️

@TallishPappy

Print Profile

0.2mm layer, 6 walls, 25% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.