Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Black Transmission Distance: 0.6

Swap Instructions:
Start with White
At layer #11 (0.96mm) swap to Silver
At layer #17 (1.44mm) swap to Grey
At layer #20 (1.68mm) swap to Black for the rest.
 

Here is the link to the appropriate lightbox

https://makerworld.com/en/models/191448