Hello!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Ash Gray
    At layer #21 (1.76mm) swap to Jade White for the rest.

Please feel free to share your results!