Summary

This is a battery case to mount a TalentCell 12V/6000mAh USB battery (affiliate link: https://www.amazon.com/gp/product/B00ME3ZH7C/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00ME3ZH7C&linkCode=as2&tag=snortimer0a-20&linkId=433046d7601bf1a3f831ab01ca3ccd69 ) under an Electric Eel Wheel Nano by Dreaming Robots (Thingiverse: mribble). You can see the battery lights through one of the top slots.

It requires six 1/2" #8 pan-head screws to clip the battery in and attach it to the Electric Eel Wheel Nano. These ones work: https://www.mcmaster.com/92470a194

You'll need supports, since there are overhangs, and I do recommend printing the main part of it flat with the opening upwards (as in the file). Print the clip flat.

As I'm just now printing the first test of this, the design may change. Feel free to print it and test it for personal use (non-commercial at this point).

Print Settings

Rafts:

                                            Supports:                      
Yes

Resolution:

100-250 microns

                                            Infill:                      
15-25%

Filament:

N/A Any

N/A

Comment & Rating (3)

@corr_vic

Hi Joel does this fit the Nano2 as well as the 1 and 1.1?

The designer has replied

@Snortimer

Hi! Sorry it took me so long to respond; I didn't know I had a comment. Yes, it will fit all variants of the Nano (not the Mini) to date, as they all use the same footprint.

@Snortimer

Yes, it does. All of the current Nanos use the same base dimensions.

No more