Summary

This is a wall mount bracket for TRENDnet's Gigabit network switch, model TEG-S80g (or TEG-S50g). It's designed to allow access to the network ports, while keeping the activity lights visible from the top.

If you prefer a more secure mounting, you can print two brackets and place one on the bottom and one on the top of the switch.

Requires four flat-head screws per bracket to secure it to the wall.

EDIT: I just uploaded a version of each bracket for use with a pan-head screw, to reduce the tendency for the screws to split the layers.

I've also added a version for the longer, 171mm-long switches.

Print Settings

Printer Brand:

LulzBot

                                            Printer:                      
TAZ 5

Rafts:

                                            Supports:                      
Yes

Resolution:

0.2mm

                                            Infill:                      
30%

Notes:

Printed in Silver PLA (Village Plastics), with the flat side (without screw holes) down. Use supports in the screw holes, if you like (I did). You can probably do it without supports, too.