Print Profile(1)
Description
Feel free to leave a comment or a boost if you like the print
Instructions
You can resize, but be careful not to modify the Z-axis
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Print with 100% infill, a layer height of 0.08mm, and a base layer of 0.16mm
The model measures 170 x 225.69mm
You can print with layer heights greater than the base thickness of 0.4mm
The maximum allowed thickness is 2.8mm and the actual thickness is 1.6mm
#000000 PLA WANHAO PLA BLACK Transmission Distance: 0.2
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA WANHAO MATTE White Transmission Distance: 3.6
#c5c1bf PLA WANHAO PLA GLACIER GRAY Transmission Distance: 2.4
This print uses 4 unique filaments
Color change instructions:
Start with WANHAO PLA BLACK
At layer #8 (0.72mm) use BambuLab Basic Blue Gray
At layer #12 (1.04mm) use WANHAO MATTE White
At layer #13 (1.12mm) use WANHAO PLA GLACIER GRAY
At layer #16 (1.36mm) use WANHAO MATTE White for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)