Bottle Adapter for Can 0,33l / 0,5l by BamBam Design

BamBam Design

Tools>Gadgets

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Anycubic Kobra 2

[V1.1] Various Layers, 3 walls, 15% infill

Designer

56 min

2 plates

4.8(18)

[Single Plate byObject]0.12mm layer, 3 walls, 15% infill

Designer

43 min

1 plate

4.8(4)

a1 mini 0.12mm layer, 3 walls, 15% infill

1 h

2 plates

5.0(1)

0.15mm layer, 3 walls, 20% infill(Print by Object)

56 min

1 plate

Click to see more

Open in Bambu Studio

Boost

142

204

255

308

Released

Description

Bottle Adapter for Can 0,33l / 0,5l

Here it is….. the printable adapter to convert your can into a bottle!

Short

Snag fit for 0,33l / 0,5l Cans
Good tightness tested with PLA & PETG
Little latch to remove from can (Holds very strong)
Integrated Thread with is compatible with most Screw Caps (2mm pitch)
Printable Screw Cap on second Plate

It could be a little bit hard to push it on the can but that is important to get a good tightness.

It's recommended to print in PLA+ or PETG do not use Silk it will break to easy.

Have fun with the part 🍻 And don't forget to like and subscribe✔

Commercial license you can get here:

https://www.patreon.com/BamBamDesign/membership

Comment & Rating (49)

@simon.b25256

Print Profile

[V1.1] Various Layers, 3 walls, 15% infill

Other Issues:sadly print failed using the profile on here

The designer has replied

@BamBamDesign

Thanks for review. Which printer and filament?

@simon.b25256

Replying to @BamBamDesign :

a1 mini bambu pla basic. ive made a profile that ill upload in a minute of a modified 0.12 print that works perfect with a1 mini

@BamBamDesign

ok all right 👍🏼

(Edited)

@user_3508377020

Print Profile

[V1.1] Various Layers, 3 walls, 15% infill

Brilliant idea and for the most part is spill resistant. Love it and will use it constantly.

The designer has replied

@BamBamDesign

Thank you for your review👍 The inner flat ring is a custom bring and should be removed 😉

(Edited)

@user_3508377020

Replying to @BamBamDesign :

:/). lol. I did remove it. using it this morning at work. :-).

@BamBamDesign

Replying to @user_3508377020 :

😂😉

@dryfiredude

Print Profile

[V1.1] Various Layers, 3 walls, 15% infill

First draft was in black at full speed. Aux fan was on by default. Speed was at 100%. Second draft in white. changed filament to see if it helped. turned off Aux fan and turned speed down to silent mode. came out much better everywhere except two small spots on the seam. this one should be usable.

(Edited)

The designer has replied

@BamBamDesign

Thanks for review with pic and description. Seems like a cooling issue. A1 or X/P series? Open door? PLA or PETG? If nothing helps i will change the angle a bit. Thanks for helping to make things better😉

@dryfiredude

Replying to @BamBamDesign :

Updated my rating. Tried with slower speed and no Aux fan. Looks much better. I may try again at full speed with no Aux just to see what halpens.