Modular Stackable Drawer System

A simple, modern, infinitely stackable drawer system.

Key Features

• Infinitely Stackable
• Large Capacity
• Modular Assembly
• Optional Stoppers
• Optimized to use as little filament as possible

Dimensions

• External Footprint: 19.5 cm (Width) x 19 cm (Depth)
• Internal Drawer Space: 19 cm (Width) x 16.5 cm (Depth)
• Height: A single, complete module is approx. 8 cm tall. Each additional stackable module adds 5.5 cm in height.

For Best Results, Use My Print Profile

To maximize your success, I highly recommend using the included Print Profile. I have spent a lot of time testing and optimizing this profile for the best results, minimal warping, and the strongest parts. Please use it as your starting point for a perfect print.

Assembly & Parts

The system consists of 5 main parts:

• Base: The foundation for your first module.
• Side Walls (Left & Right): These lock into the base and provide the rails for the drawer.
• Drawer: The main storage bin.
• Top: A final "lid" piece to give the top module a clean, finished look.
• Stoppers (Optional): These can be inserted into the back of the rails to stop the drawer.

The parts are designed to lock together. However, depending on your print's adhesion and potential warping, the connections might feel loose when picking it up. While it functions without it, I recommend adding a few drops of superglue at the connection points during assembly. This makes the entire unit rock-solid and permanent.

----------------------------------------------------------------------------

If you like this model, please consider giving it a Like and a Rate! It helps a lot.

Happy Printing!