Republic Commando Miniature by Galactic Armory

Galactic Armory

Miniatures>Other Miniatures

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 3 walls, 10% infill

Designer

8.5 h

1 plate

4.6(42)

300% - 0.16mm layer, 3 walls, 10% infill - 15cm

6 h

1 plate

4.7(22)

0.16mm layer, 3 walls, 15% infill

20.7 h

1 plate

4.7(6)

Full Color 0.16mm layer, 3 walls, 5% infill

41.9 h

1 plate

3.3(4)

Boost

595

885

1.8 k

580

Released

Description

3D Files for a 1:12 and 1:48 scale version of a Republic Commando!

This is 1 pose of a 10 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory

Comment & Rating (94)

@user_1512086029

Print Profile

0.16mm layer, 3 walls, 10% infill

Made a full color print that took just over 48 hours. Looks great.

@user_320094572

Really great model, but I lost his fingers when trying to take off the supports. might add some putty and turn his hand into a fist.

@johnfcooley

Boosted

Print Profile

0.16mm layer, 3 walls, 10% infill

Came out great. I had to print twice as I tohed with the support settings on the first and welded them to the model, my fault. Second was perfect. Thank you

(Edited)

@ronsaval

what were the support settings on your second print?

@johnfcooley

Boosted

Replying to @ronsaval :

Yours. I thought I knew better (i didn't) and mucked with the top interface. I also used a cheaper filament, which didn't help. I've printed all the others with Bambu Matte White and they were perfect. The lesson is, the designer knows what they're doing.

@Bekkenes

Print Profile

0.16mm layer, 3 walls, 10% infill

this is my 5th print, first big and first with supports. found very hard to remove and unsure if I should have unchecked supports when building. on the hand not holding gun all fingers went off with support other then thumb. . I was thinking about buying a patreon but for now I'll stick with the one I printed as I think I need to become more proficient. maybe my issues could be avoided using bambu lab support pla but then print went from 8 to 20iah hours.

@R0k3z

Boosted

Amazing design. Turnd up great. Thank You 😀

@hatchgreen

turned out amazing!!! but the supports were rough to remove. broke his figures on his left hand 😅 how has everyone else gotten those little guys?

@tomtoast

Boosted

Print Profile

0.16mm layer, 3 walls, 10% infill

Very cool model, I really enjoyed printing and painting it, however fingers were flimsy and fell off when removing supports. :)

(Edited)

@steven.w.shockn

Print Profile

0.16mm layer, 3 walls, 10% infill

awesome print. Be careful when removing the supports around the fingers. take your time and it will come out great.

@Okane77

Print Profile

0.16mm layer, 3 walls, 10% infill

Turned out pretty good. Tree support was a bit crazy.

@Digitaljedeye

Print Profile

0.16mm layer, 3 walls, 10% infill

had the same issue with the fingers snapping off. Perhaps a fist would be better. but this was my first large model print. still came out nice.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.