Vernier Caliper Ruler - Two Lengths
Copyright Claim
Vernier Caliper Ruler - Two Lengths
Boost
1072
1798
538
Print Profile(9)
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
COLOR, 150mm LONG - 0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
NO COLOR, 150mm LONG - .0.2mm layer, 2 walls, 15% infill
Designer
59 min
1 plate
NO COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
Click to see more
Boost
1072
1798
538
71
3.9 k
3.1 k
Released
Description
Vernier Caliper Ruler - Two Lengths
***NEWLY ADDED 28 FEB 2024 Optional Depth Gauge for both versions. see separate profile for this option. ***
- Two lengths to choose from, 150mm suited for A1 Mini or 210mm for larger print beds.
- Great for occasional use or as extras around the house!
- Nice educational and learning tool for students or young hobbyists!
- Recommend using Bambu Lab PLA and dark color for the top layer to prevent color bleeding.
- Please like and subscribe! More to come!
🔥🔥 Check out my PRO MODELS HERE! https://cults3d.com/en/users/FabulousFilaments/3d-models 🔥🔥
Comment & Rating (538)
All
打印效果非常棒，我做了一点修改
(Edited)
4
Reply
這個設計太棒了, 請問是否可以分享?
0
Reply
Replying to @great.foto
最后一个打印配置《修改模型》就是我上传的，可以去下载哦
1
Reply
Print Profile
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
Very nice, precise. Just a bit difficult to read, maybe it's the colors i chose : Bambu lab matte PLA dark blue and sakura pink.
Do you think i can achieve better resuls with a 0.2 nozzle ?
The designer has replied
2
Reply
Love it 👍🏻
(Edited)0
Reply
Replying to @3DPrintMastersH
Thanks, i've notice a flaw in the design : On the vernier scale, 10 ticks should correspond to 9mm to be able to read decimals.
I've made another one in fusion and it works great, but i can't post it because you do not allow remixes...
(Edited)1
Reply
Replying to @Kemykemy87
Thank you for bringing this to my attention. Although the main scale is accurate, I will review the information and see if I can add the ten ticks along the bottom. I will provide an update soon. UPDATE: I was able to add the missing 10 ticks along the bottom. All files have been updated 👍🏻
(Edited)0
Reply
Print Profile
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
very nice...!..good.good.good
The designer has replied
4
Reply
Very nice 🤩
(Edited)1
Reply
Boosted
Print Profile
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
Great print!!! A little tight at first but I'm sure it will wear in. Thanks for the model.
The designer has replied
2
Reply
Nice 👍🏻
(Edited)1
Reply
Print Profile
P1P NO COLOR - BEST P1P SETTINGS
print came out perfectly with sunlu PLA+ filament. Scale accuracy is very good as well!!
1
Reply
waiting for A1's to become available, what do you run Sunlu pla+ as? bambu pla or generic pla? thanks
0
Reply
Print Profile
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
So far just printed the ruler part printing the other part. Unfortunately I dint have the AMS system but this model was great because I didn't even need a AMS system for this I just paused it mid way then changed the filament and it came out amazing 👍
2
Reply
Print Profile
COLOR - 220mm LONG - 0.2mm layer, 2 walls, 15% infill
Brilliant! I'm impressed! Printed a few of these as extras around the house and some for the boys. Printed nicely with Bambu Lab PLA and was surprised about the accuracy and overall functionality. Thank you for the upload!
2
Reply
Print Profile
COLOR, 150mm LONG - 0.2mm layer, 2 walls, 15% infill
The organizer serves its purpose, nice model thanks to the author for sharing. The printing went without any complications.
2
Reply
Print Profile
COLOR, 150mm LONG - 0.2mm layer, 2 walls, 15% infill
Works quite good but the outer scale does not align to the innter one. Towards the 5cm mark it is off by 1mm.
0
Reply
that is actually how it should be. Every 5th line represents 0.1mm. You read the full mm then compare the lines and count which one matches (one of them does) so you get a more accurate reading then just 1mm.
For example on your picture the Line at 1 cm matches the 10th line on the bottom which means your current messurment is 0.2mm instead of 0mm.
(Edited)1
Reply
Amazing, works really well! Thanks a ton! Printed on the AnkerMake M5C with Creality blue hyper PLA. Precision preset with the 0.4 nozzle and 0.16 layer height.
1
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld