Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Protopasta Black Transmission Distance: 0.5

PLA Protopasta Black Transmission Distance: 0.5

PLA Sunlu Green / Or other GREEN Transmission Distance: 6

PLA PolyLite Polymaker Teal / Or other CYAN Transmission Distance: 0.5

PLA PolyLite Lime Green Transmission Distance: 3.5

Swap Instructions:

Start with Black

At layer #4 (0.4mm) swap to Black

At layer #9 (0.8mm) swap to Green / Or other GREEN

At layer #14 (1.2mm) swap to Polymaker Teal / Or other CYAN

At layer #17 (1.44mm) swap to Lime Green for the rest.