This is another of my series of Adventure Pug™ themed coasters, created with HueForge. This is designed at 4.07mm thickness and 100mm (4-in) square, but can be scaled up to make it into wall art. Just make sure to uncheck the uniform scale box, and do not scale the z axis at all. Due to the thickness and 100% infill, make sure you have really good adhesion, and turn off the aux fan to minimize the chance of warping.

Print settings:

• 0.16mm base layer
• 0.08mm layer height
• Ironing all top surfaces (25% flow)
• 100% infill
• 9 top shell layers and 0.8mm top shell thickness
• 5mm brim with 0.1mm gap

Filaments and color changes (TD values are my own and may not match HueForge defaults)

• Start with Overture Matte Black (TD 0.1mm)
• At layer #27 (2.24mm) swap to Overture Matte Navy Blue (TD 0.4)
• At layer #30 (2.48mm) swap to Elegoo Matte Ice Blue (TD 4.2)
• At layer #34 (2.8mm) swap to Overture Matte Yellow (TD 3.6)
• At layer #40 (3.28mm) swap to Overture Matte white (TD 4.0)

I've included 4 print profiles for convenience:

• AMS ready - full size bed
• Pauses for manual filament swaps - full size bed
• AMS ready - A1 Mini bed
• Manual filament swaps - A1 Mini bed

If you're using an AMS, you'll need to add the 5th color (white) to slot #1 at some point after layer 27.