Angular Grip by Byrd Anthony

Byrd Anthony

Props & Cosplays>Replica Weapon

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 6 walls, 70% infill

Designer

2.9 h

1 plate

4.8(40)

0.2mm layer, 6 walls, 70% infill

4.3 h

1 plate

4.5(4)

0.2mm layer, 4 walls, 40% infill Fine Fuzzy skin

5.4 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

385

623

742

342

Released

Description

An old angular grip that I converted years ago for an airsoft gun that I had. I redid the process in Fusion360 and gave it a shot at printing with Bambu Carbon PLA.

Comment & Rating (57)

@user_3395155048

Print Profile

0.2mm layer, 6 walls, 70% infill

Great model, quite comfortable when installed. I used M5x30mm cap head bolts and nylocs. had to widen the bolt head recess a little bit that was likely affected by applying the fuzzy skin on my print profile.

The designer has replied

@ByrdAnthony

looks great!

(Edited)

@3DVJModels

Print Profile

0.2mm layer, 6 walls, 70% infill

Turned out great! Printed this at a .16mm layer height to try to hide layer lines much more.

(Edited)

@spdun2004

Print Profile

0.2mm layer, 6 walls, 70% infill

could use a little support in the triangle. really good design

@Reloader_1

Print Profile

0.2mm layer, 4 walls, 40% infill Fine Fuzzy skin

looks and works great!

(Edited)

@Mitch23

Print Profile

0.2mm layer, 6 walls, 70% infill

Excellent. Easy print and worked great for me. Only downside were all the supports but they are unavoidable due to the nature of the item being printed.

@user_3103349143

Boosted

Print Profile

0.2mm layer, 6 walls, 70% infill

(Edited)

@user_2750705076

Print Profile

0.2mm layer, 6 walls, 70% infill

@Jgollnickjr

this thing works with a1 min that’s all I have to say

@Brundy28

Print Profile

0.2mm layer, 6 walls, 70% infill

it just works!

@chembal

what hardware is needed to mount to picatinny rail?

The designer has replied

@ByrdAnthony

this is what I used from Home Depot

@user_3395155048

Replying to @ByrdAnthony :

I have ordered M5x30 cap head bolts, they might be a little long. it was difficult to measure the grip width and I felt that 25mm was a little short. I will feedback when they arrive.